Vestax VRX-2000 Owner's Manual download pdf (Page 10)

Section 10: ASSEMBLY AND SET-UP

10.1 Platter assembly

1. Insert platter to center spindle

2. Put platter weight on platter

3. Put silicone mat on top of platter weight.

Caution: make sure silicone mat is dust-free

4. Remove the protective sheet of blank disc on both sides, and place blank disc on silicone mat; push the

blank disc down on silicone mat using a lint-free cloth or the included record cleaner. Apply sufficient

pressure to firmly secure the vinyl blank to the silicone mat.

5. Screw disc holder and secure blank.

x If the blank disc is not dust-free, it may create skipping or noise problems. Ensure your blank is

perfectly clean.

x If the blank disc is not secured to silicone mat, slipping may occur which will render your final

cut unusable.

10.2

Ioniser Assembly

Secure ioniser with 2 screws as per picture below.

(Figure 10.2-A)

FIG10.2-A

10.3

Tracking arm/counter weight assembly

Assemble counter weight on the rear of tracking arm.

(Figure 10.3-A)

FIG10.3-A

Disc holder

Blank vinyl disc

Silicone mat

Platter weights

Platter

Center spindle

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Vestax VRX-2000 Owner's Manual Page 10